Thinners

HomepageProductsThinners

CL 07

environmentally friendly cleaner, degreaser and stripper

Used for cleaning application equipment, cleaning wet or dry waterborne paints drips, degreasing surfaces before application of any type of paint and removal of old paint, dip for long enough. Applying by the a spray-gun, a brush or a towel. After short effect of CL 07, the surface must be wiped with a clean and dry towel. Depending in the degree of grease use a new towel. After use CL 07 rinse the surface with clean water! Do not use to adjust the viscosity of paints. CL 07 does not contain either acids or alkalies.

Usage: special
Technical data sheet
Safety data sheet
Technical data sheet:
CL 07351.27 kBENdownload
Safety data sheet:
CL 07232.44 kBENdownload

C 6000

thinner for nitrocellulose coating materials.

C6000 is intended for the viscosity adjustment of coating materials VITON if necessary accelerate the drying time, typically during application the paint at low temperature or during application the paint on small and rugged surfaces. The quantity of thinner depends on the chosen type of application, on the temperature and on the type of chosen paint. The maximal quantity is specified in the technical data sheet of the particular paint. Mentioned thinner is intended only for coating materials and paints by VITON s.r.o. When applying a VITON paint combined with a thinner by another manufacturer the paint guarantee expires. 

Usage: thinner
Technical data sheet
Safety data sheet
Technical data sheet:
C 6000355.26 kBENdownload
Safety data sheet:
C 600083.90 kBENdownload

PT 03

thinner for polyurethane and acrylic coating materials.

PT 03 is intended to adjust the viscosity of VITON paints applied by a spray gun, a brush or a roller. The quantity of thinner depends on the chosen type of application, on the temperature and on the type of chosen paint. The maximal quantity is specified in the technical data sheet of the particular paint. Mentioned thinner is intended only for coating materials and paints by VITON s.r.o. When applying a VITON paint combined with a thinner by another manufacturer the paint guarantee expires. 

Usage: thinner
Technical data sheet
Safety data sheet
Technical data sheet:
PT 03633.55 kBENdownload
Safety data sheet:
PT 0382.72 kBENdownload

KT 01

thinner for synthetic coating materials applied by spraying.

KT 01 is intended to adjust the viscosity of VITON paints applied by a spray gun. The quantity of thinner depends on the chosen type of application, on the temperature and on the type of chosen paint. The maximal quantity is specified in the technical data sheet of the particular paint. Mentioned thinner is intended only for coating materials and paints by VITON s.r.o. When applying a VITON paint combined with a thinner by another manufacturer the paint guarantee expires. 

Usage: thinner
Technical data sheet
Safety data sheet
Technical data sheet:
KT 01631.28 kBENdownload
Safety data sheet:
KT 01429.64 kBENdownload

KT 04

fast recoatable thinner for synthetic coating materials.

KT 04 is intended for the viscosity adjustment of coating materials VITON if necessary to apply more layers in a short time interval. The quantity of thinner depends on the chosen type of application, on the temperature and on the type of chosen paint. The maximal quantity is specified in the technical data sheet of the particular paint. Mentioned thinner is intended only for coating materials and paints by VITON s.r.o. When applying a VITON paint combined with a thinner by another manufacturer the paint guarantee expires. 

Usage: thinner
Technical data sheet
Safety data sheet
Technical data sheet:
KT 04631.49 kBENdownload
Safety data sheet:
KT 0484.17 kBENdownload

KT 06

Thinner for synthetic coating materials applied by roller or brush

Usage: thinner
Technical data sheet
Safety data sheet
Technical data sheet:
KT 06401.55 kBCZdownload
KT 06401.55 kBENdownload
Safety data sheet:
KT 06351.25 kBPLdownload

ZT 03

thinner for epoxy coating materials.

ZT 03 is intended to adjust the viscosity of VITON paints applied by a spray gun, a brush or a roller. The quantity of thinner depends on the chosen type of application, on the temperature and on the type of chosen paint. The maximal quantity is specified in the technical data sheet of the particular paint. Mentioned thinner is intended only for coating materials and paints by VITON s.r.o. When applying a VITON paint combined with a thinner by another manufacturer the paint guarantee expires. 

Usage: thinner
Technical data sheet
Safety data sheet
Technical data sheet:
ZT 03634.72 kBENdownload
Safety data sheet:
ZT 0380.58 kBENdownload

Product search